MER Equipment-Electrical Panel Options

1. Murphy-Helm View (P/N RE533925 for single or dual engine, single station) Has an oversized, full-color VGA flat screen to display engine, transmission, tank levels, depth, speed, temperature and even GPS charting. 
2. John Deere Propulsion Panel (P/N RE521033 Single Engine) The Deere panel has tachometer, oil pressure, coolant-temperature and volt meter. Included are the Murphy Power View and alarm functions.
3. MER Panel W/ Murphy Power View (P/N RE533087) Large, easy-to-read LCD display shows oil pressure, coolant temperature, voltage, engine speed, and percent of power used.
4. John Deere W/Power View-Generator Set Applications (P/N RE522233, with many variations available) The Power View displays active & stored diagnostic trouble codes on electronic engines.  The unit shows oil pressure, coolant temperature, voltage, engine speed, and more.
5. MER-Generator Panel (P/N 20211) MER built instrument panels for generator sets include tachometer, oil pressure, coolant temperature and volt meter.
6. John Deere-Industrial Gen-set (P/N RE521564, with many variations available) Incorporating the Murphy Power View and analog gauges, this panel also has the speed control rocker switch, keyed off-on-start switch and shut-downs for low oil pressure and high coolant temperature.
7. Model DSE701 is a Manual/Auto Start Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input. It also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator.  When the module detects a fault condition it automatically shuts down the engine. The module also includes a remote start signal input. The input allows the module to be started from a pre-defined remote location.
8. Model DSE710 is an Automatic Start Control Module that has been designed to monitor generator frequency, generator volts, generator current, engine oil pressure, engine coolant temperature, engine running hours and battery volts. The module also displays the engine speed. When the module detects a fault condition it automatically shuts down the engine and indicates the exact fault on the modules LCD display or relevant LED indicator.   The module can be configured using the front panel or via the DSE810 interface and a PC. The module can also be controlled from a PC that is located up to 100 meters away.
9. Models 6110 &6120: Are automatic engine control modules that can automatically start and stop the engine, and indicates the operational status and fault conditions.
10. MER-Propulsion/Hydraulic Power Unit Panels  (P/N 20214) MER built instrument panels include tachometer, oil pressure, coolant temperature and volt meter and alarms.
11. MER Custom Combination A.C./D.C. Panel (P/N 85654) The combination panel (100 amp shown-many other configurations available) provides oil pressure, coolant temperature, volt meter and hour meter, and alarms. The A.C. side includes volts, amp, and frequency meter.

Download Electrical Panel Options PDF